Custom hood approx 43x43x23" made from 16 Ga Copper and 2"x1/4" buss bar, fully welded with patina and wax finish.The builder for this project is Dettrich Homes in Freeland
Tuesday, August 18, 2009
Copper Range Hood
Custom hood approx 43x43x23" made from 16 Ga Copper and 2"x1/4" buss bar, fully welded with patina and wax finish.The builder for this project is Dettrich Homes in Freeland
Stainless Steel Back Splash
Custom Splash panels made from 20 ga #4 Stainless steel.The builder for this project is Spectrum Construction in Langley and designed by Flat Rock Productions
Hot Rod Go Kart
New custom "Go Kart" built from electrical conduit a good friend gave me.
Another good friend traded me the motor (Honda 5.5 hp) for some metal and I rescued it from the bushes. The basic hardware I bought on line (Sprockets, Bearings and such). I found the rear wheels at Island Recycling. The most help was from "Affordable Go Karts.com"! They sell and support all kinds of crazy hot rod parts, thanks!
Tuesday, July 21, 2009
Metal "Ship Plate" Retaining Wall
Heavy Steel plate wall approx 14 feet long made from recycled plate and hand forged rivets.
Steel Fire Place Hearth
5/16" steel plate with "Rustic Patina" - 26 pieces total!
Located in a newly constructed Langley residence, designed by Todd Soli @Soli Terry Architects and built by Gemkow Construction.
Metal Entry Arbor
Entry Arbor made from 3"x4" heat formed steel tube, 3/4" steel rod and 3/16" rods at top.
Monday, July 20, 2009
Metal Coat Rack and Stair Rail Project
Hand rail made from 3/4" rods.
Custom coat rack made from 5/8" rod.
Steel post and Rail Project
The Rails and posts are made from good ol' 3/4" steel rod.
Christie and Bruce Schwager Designed and built the amazing madrona doors!
New Gallery Work
"Re-Entry" set up outside of Robert Daniel Gallery.Entry Arbor made from Hot and Cold formed 3/4" steel rod.
These two are “COUNTESS” and “MATRON” they are formed from “Rustic Steel Plate”
This Piece is called “TRU-TO FORM” it is soldered “Zinc Plated steel”.These new works by "Me" on display @ Robert Daniel Gallery on Fawcett st in Down Town Tacoma.
Metal Entry Signage
Entry Signage made from 1 in Angle Iron, Hand formed recycled Copper and Hand set Rivets.
Located in Langley WA
Zinc Coffee Table
New Zinc metal top hand formed from 4 pcs of flat "S" seamed pcs of sheet.
Mounted on owner supplied "Found" remodeled file cabinet.
Metal Stair Railing
Great colaboration with Baerg construction.
Made from 1 1/4" pipe, 5/8" rod, flatbar and clearcoated.
Wood work done by Baerg const.
Wood work done by Baerg const.